Single zone universal shock sensor analyser
Uses the well proven time/pulse integration system
Features a wide-range sensitivity control, auto-reset alarm
relay & LED indicator
Can be located within an alarm control panel or mounted externally
Microswitch cover removal tamper
Can be used to supervise up to 10 shock sensor modules
Dimensions: 80 x 53 x 25 mm
The MA100T is a universal analyser designed to interface with up to 10 shock sensors of the mass-inertia type, which are mounted on surfaces of a similar nature. The circuit uses time/pulse integration where an alarm occurs following either a series of small shocks, a smaller number of larger shocks or one very large shock (gross attack). The unit is suitable for use with most mass inertia shock sensors but we strongly recommend the CQR range of shock sensor
| Mounting Type | Surface |
|---|---|
| Sealed or Screw Entry | Screw |
| Auto Learn Capability | Manual |
| LED Status Indication | Yes |
| Pulse Count | Auto |
| Slave Sensor Facility | Up to 10 |
| Quiescent Current | 30 |
| Alarm Relay | Normally Closed |
| Alarm Relay Rating | 12v DC 250mA |
| Commodity Code | 85311030 |
| Country Of Origin | UK |
| Height (mm) | 30 |
| Width (mm) | 57 |
| Depth (mm) | 88 |
| Barcode | 5.0604E+12 |
| Weight (kg) | 0.071 |
| Colour | White |
| EN50131-2.8 grade | 2 |
| Tamper Protection | Cover Normally Closed |
| EN50130-5 class | II |
| IP Rating | 3X |
| Temperature Range | -15° C to +40° C |
| Dimensions (mm) | 80 x 80 x 25 |
| Voltage range (Vdc) | 10.5 – 16 |
| Nominal voltage (Vdc) | 12 |
| Alarm Current (mA) | 35 |
| No. of slave sensors | Up to 10 |
| Sensitivity Adjustment | Yes |
Our enthusiastic team have decades of industry experience, contact them today for world-class support.
