Electrical Hardware

Our extensive range of electrical hardware ancillary devices are independently tested for life and performance to ensure your system has the best possible devices.

Deedlock products are highly specified solutions designed for the installer, specification, and door manufacturers exacting standards.

Electro-Magnetic Locks

Electro-Magnetic Locks are electrified locking devices which consist of a electro-magnet and an armature plate to lock a door when powered up, then released by a device such as a push to exit button or keypad.

  • Micro / Midi / Slimline / Standard / Shear / Mortice / External / Cabinet & Pro ranges provide a market leading comprehensive and performance range
  • TS010 performance technical standard
  • Fire Rated for use on Timber Doors to EN1634-1
  • Extensive range of brackets to ensure the correct fit for every Electro-Magnet door configuration
  • All magnets fitted with Deedlock by CQR kick-off pin in the armature plate to overcome residual magnetism when power to the magnet is off
Electro-Magnetic Locks

Electric Releases

Electric Releases are an electrified locking device fitted into the internal of the door and frame which uses electricity to move the latch and unlock or lock the door.

  • 12V and 24V AC and DC options available
  • Fail locked or fail unlocked options with monitoring available
  • Can be used for inward or outward opening doors
  • Fire rated for 30 and 60 minute timber doors available
  • Extension lips available for different retrofit and new installation projects
Electric Releases

Electric Locks

Electric locking products are available in two variations, solenoid or motorised types. They are designed to provide controlled access through a door in one or both directions by controlling the operation of the locking bolt. Unlike electric releases, which are a combination of a mechanical latch and an electrically controlled striker.

  • Higher holding forces than other electric locking products
  • Available fail-unlocked and fail locked
  • Surface housing kits available
  • Single-action and double action available
  • Available for swing and sliding doors
  • Many of the solenoid bolts can be fitted in the header or door jamb
  • Solenoid bolts are 12V DC
  • Motorised locks are available 12 / 24V DC
Electric Locks

Keypads & Readers

Keypads and readers allow for either key-coded PIN entry or the use of a proximity reader with a card or fob to enable access throughout a building.

  • Keypad and proximity combined units are available.
  • Devices with up to 10,000 maximum users
  • 12-24 AC/DC & 12V DC avalable
  • Chrome, Black ABS Plastic, Polished Chrome & White Plastic designs
  • IP65 & IP66-rated versions available for external use
  • 125 MHz EM & MiFare compatible options
Keypads & Readers

Exit Buttons

Exit buttons are often referred to as RTE’s (Request to Exit Buttons) their function is to release a locking device from the non-secure side of the door. Once the exit button is activated the door can be released and then relocks on closure.

  • Available in multiple sizes with stainless steel and white plastic
  • Touch free range available: Ideal for hygiene essential environments
  • Backlit options available
  • Domed version available
  • Various legend design types such as Press to Exit / Exit / No Touch
  • Flush mounted or multiple backbox options available
  • Single gang & Architrave designs
Exit Buttons

Manual Call Points

A Manual call point (MCP) also known as a break glass unit is
a means of releasing a locking mechanism from the door in an emergency often used on access control and fire systems, along with gas supplies and water shut offs. Following activation of a MCP they are reset using a special key.

  • Available as red single pole EN54 approved for conventional fire systems
  • Available in green for access control systems as Single, Double and Triple Pole
  • Glass and Resettable elements supplied as standard
  • High visibility LED as standard
  • Transparent covers available to prevent accidental operation
  • Backlit versions available
Manual Call Points

Power Supplies

A Power supply unit (PSU) converts mains AC to low voltage regulated DC power for use with electrical products such as electro-magnetic locks, electric releases, access control, CCTV and Intruder alarm systems.

  • 12v and 24v DC available
  • Various amperes from 1A to 10A available
  • All Switch Mode as standard for ultra-low power consumption
  • Multiple box sizes available for different battery support sizes
  • Graded range for Intruder Systems available
  • Fused splitter outputs available for CCTV applications
Power Supplies **

** Click to www.securefast.co.uk

Access Control Kits

The new CQR range os access control kits provide full solution packages to your project requirements.  Available for multiple solutions in 4 key sets:

  • AKT4251 – Internal & External Kit with Bluetooth / WIFI
  • AKT4252 External Gate Kit
  • AKT4253 Internal & External Kit with Proximity Reader
  • AKT4254 No Touch Internal & External Kit
Access Control Kits **

Access Control Accessories

Access Control accessories are ancillary devices to support access control equipment such as door loops and spare fobs and cards.

  • Range of Door Loops for concealed or surface mounted operation
  • Door loops allow the transfer of power from the frame to the door safely
  • Door loops suitable for single and double doors
  • Relays for enabling switch currents from 12V to 230V using 12/24 Signal
Access Control Accessories **

** Click to www.securefast.co.uk

SPEAK TO AN EXPERT

Our enthusiastic team have decades of industry experience, contact them today for world-class support.