Single zone universal shock sensor analyser
Uses the well proven time/pulse integration system
Features a wide-range sensitivity control, auto-reset alarm
relay & LED indicator
Can be located within an alarm control panel or mounted externally
Microswitch cover removal tamper
Can be used to supervise up to 10 shock sensor modules
Dimensions: 80 x 53 x 25 mm
The MA100T is a universal analyser designed to interface with up to 10 shock sensors of the mass-inertia type, which are mounted on surfaces of a similar nature. The circuit uses time/pulse integration where an alarm occurs following either a series of small shocks, a smaller number of larger shocks or one very large shock (gross attack). The unit is suitable for use with most mass inertia shock sensors but we strongly recommend the CQR range of shock sensor
| Voltage range (Vdc) | 10.5 - 16 |
|---|---|
| Nominal voltage (Vdc) | 12 |
| Dimensions (mm) | 80 x 80 x 25 |
| Colour | White |
| IP Rating | 3X |
| Temperature Range | -15° C to +40° C |
| Tamper Protection | Cover Normally Closed |
Our enthusiastic team have decades of industry experience, contact them today for world-class support.
