CQR Firebrand – Network Panels2018-06-25T11:04:24+00:00

Firebrand Network Panels

The FireBrand FI/PN/A/NET Network panel is a powerful anaologue addressable fire alarm control system with networking capabilities that facilitate the configuration of complex wide area fire detection systems.

  • Fully expandable system – from 1 to 96 loops
  • 125 device addresses per loop
  • 96 Sounders (addressable) ultra low current base sounders per loop (32 address limit)
  • 32 individually programmable sounder addresses per loop
  • Full SAM and MAM support – Wizmart protocol only
  • 2 Fire output relays (change-over) and 1 Fault relay (Normally Closed)
  • Open collector outputs for Fire, Fault and Pre-alarm remote indicators
  • All detector loops monitored for integrity
  • 384 fully programmable zones
  • 512 fully programmable sounder groups
  • 512 Input and Output groups
  • Event log (rolling, 2000 entries)
  • Programming by panel keypad, infra-red remote keypad, PC keyboard and Windows™ based “Loader” software
  • Windows™ based PC graphics software for alarm management and reporting
  • CPR Certified
  • EN54-11 Approved
FI/PN/A/NET/3L 3 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/4L 4 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/5L 5 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/6L 6 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/7L 7 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/8L 8 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/9L 9 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/10L 10 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/11L 11 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/12L 12 Loop 32 Zone FireBrand Inc LEDs
FI/PN/A/NET/13L 13 Loop 32 Zone FireBrand Inc LEDs